- Connects with the computer's USB port.
- Program the AVR microcontroller via ISP connector.
- Plug direct to the target board. The ISP cable is not required .
- Supports Read, Write, Erase and Protection functions.
- Requires +5V power supply from target/master board.
Features :
- Operates with the AVR Program software. This software is included in the AVR Studio and can be found in the tools menu and works with the Avr-OspII software as well.
Model Numbers of microcontroller supported in AVR Prog software
AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4433 , AT90S8515 , AT90S8535 ,
ATmega128 , ATmega16 , ATmega161 , ATmega162 , ATmega163 , ATmega164P ,
ATmega165 , ATmega168 , ATmega32 , ATmega64 , ATmega8 , ATmega8515 , ATmega8535 ,
ATtiny12 , ATtiny13 , ATtiny15L , ATtiny2313, ATtiny26
Model Numbers of microcontroller supported in Avr-OSP II software
AT90CAN128, AT90CAN32, AT90CAN64,
AT90PWM2, AT90PWM3,
AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4433, AT90S4434,
AT90S8515, AT90S8515comp, AT90S8535, AT90S8535comp,
ATmega103, ATmega103comp, ATmega128, ATmega1280, ATmega1281,
ATmega16, ATmega161, ATmega161comp, ATmega162, ATmega163, ATmega165,
ATmega168, ATmega169,
ATmega2560, ATmega2561,
ATmega32, ATmega323, ATmega325, ATmega3250, ATmega329, ATmega3290,
ATmega406, ATmega48,
ATmega64, ATmega640, ATmega644, ATmega645, ATmega6450, ATmega649,
ATmega6490,
ATmega8, ATmega8515, ATmega8535, ATmega88,
ATtiny11, ATtiny12, ATtiny13, ATtiny15,
ATtiny22, ATtiny2313,ATtiny24, ATtiny25, ATtiny26, ATtiny261, ATtiny28,
ATtiny44, ATtiny45, ATtiny461,
ATtiny84, ATtiny85, ATtiny861